Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-17-2005, 03:24 PM
Registered User
 
Join Date: Jul 2004
Location: Annapolis, MD
Posts: 650
Putting in the combo switch - and XM!

OK, got the combination switch from Potomac/Florida for $40 (+$10 shipping - a little steep) - you may remember that I broke it getting a new seat into the car.

I read the posts about how the 10mm allem screw that holds the steering wheel was put on by giant germans and average mortals couldn't get them off. I was surprised that a 10mm allen wrench and a 12" bar cracked it loose easily. Then I realized that the switch had been replaced before and someone with better tools probably did it. The replacement of the switch was easy, though the switch I got had a bunch of contacts on it that my old one didn't. I finally realized that they were for an airbag and I just took them off.

After that I decided to put in new speakers. The stock speakers are lousy paper cones. I spent about $125 for 4 good Pioneer speakers (4x6) and they just dropped in. But the sound was still not very good, at least on the starboard side. So I took the new hi-power stereo out of my boat and put it in. Wow, what a difference. It really sounds great ("it's only temporary, sweetie"). While I was at Best Buy, I also picked up an XM Roady2 (finally getting around to spending my Christmas bonus). I tried the antenna on the dashboard hoping to avoid running wires everywhere, but I kept loosing the signal. I ended up running the wire through a 1" grommet on the passenger side engine compartment, next to the battery. It leads into the footwell and then I fished it through the back of the glovebox area and under trim to get it to the radio area. Stuck the magnetic antenna on the hood and voila! it fell off. Forgot that the hood on the 126's are aluminum. So I stuck it on the fender by the door (it's only about 1 x1 inches) and it works perfectly. I use the FM modulator to run the XM to the radio and it sounds very good. I will probably order a RB-10 cable to run it directly into the radio and get even better sound.

After changing the seats and putting in a new radio, it's like a new car. I love it more than ever.
__________________
1984 300Sd 210k

Former cars:
1984 300D 445k (!!) (Strider) Original (and not rebuilt) engine and transmission. Currently running on V80 ( 80% vegetable oil, 20% petroleum products). Actually not, taking a WVO break.
1993 300d 2.5 275k. Current 120/day commuter
1981 300SD 188k (Hans) Killed by a deer
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page