PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Blue, 126, rear seat back, fits SEL or SDL with reclining back seat, Atlanta area. (http://www.peachparts.com/shopforum/diesel-discussion/156320-blue-126-rear-seat-back-fits-sel-sdl-reclining-back-seat-atlanta-area.html)

Bruce Bonds 06-19-2006 01:18 PM

Blue, 126, rear seat back, fits SEL or SDL with reclining back seat, Atlanta area.
 
[COLOR="Blue"]I have a very good, blue, rear seat back for FREE. No splits, cuts, nor discoloration. It came from a 1982 380 SEL. The donor car has an adjustable/reclining back seat so this seat back will not install in my 300SD. I will keep looking. I am in the Atlanta area, so if you need this seat back, you can pick it up at my house. My email address is: brucebonds@bellsouth.net

Thanks.

Hit Man X 06-20-2006 05:24 PM

Maybe you can remove the leather and horsehair? Should be easier to turn then I'd think. :confused:

Pete Burton 06-20-2006 05:32 PM

What's the difference in the reclining seat? are there brackets wlded to the floor to allow the seat to recline? wondering if the recline could be retrofitted.

Hit Man X 06-20-2006 05:40 PM

Quote:

Originally Posted by Pete Burton
What's the difference in the reclining seat? are there brackets wlded to the floor to allow the seat to recline? wondering if the recline could be retrofitted.



Totally different back there how the seat bolts in, the bolt down, not just snap in place. I've never looked close to swapping one in, but it can't be that bad. The harness just runs up the driver floor to the panel under the driver's footrest.

Then pull the harness from both doors.

The recline deal is sweet, it REALLY lays you out in the back. My 420 and the SDL both have it.

jfman 06-20-2006 05:42 PM

we have a parts section you know.

Bruce Bonds 01-21-2008 10:38 PM

This seat is still available FREE.

raydi07 01-21-2008 10:55 PM

check your email. I will take it off our hands.


All times are GMT -4. The time now is 08:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website