After messing with my non-working central locking system today, I got an idea.

Someone had cut the wires inder the dash which provide 12v and ground to the pump (my alarm buzzer is also missing). After a bit of fiddling, I got 12v and ground to the pump, only to find no signal from my door locks.

I'm assuming that the missing wires are also preventing 12v getting to the door switches.

Since I want to do a keyless entry, I got to thinking, why not just set up a system in the trunk with two relays to provide either the 12v or the grounded circuit between the pump power and the three-pronged switch on the pump.

The double pronged connector is always hot. The three pronged connector has either 12v at all three connections (Two front door switches and trunk switch) or Ground at all three, depending on whether the key switch is in unlock or lock position.

I reckon a remote/relay setup in the trunk will work, and won't give a rat's butt whether the key switches are working or not.

As long as my system holds vacuum (which my Mityvac show it does), this should work, yes?

Or am I being a nebbish again?

Any and all electrical types please comment on this.

TIA

__________________
1998 E300 +310,000K
1996 E300 +460,000K

If you check the archives, that's usually how it's done. Crutchfield used to sell a relay harness to simplify the wiring.

Sixto
93 300SD

You can install an electric actuator to pull/push the door lock mechanism on the drivers door. I use it on mine and it works fine. It will work with any alarm that has a remote lock feature or they can be bought as a self contained remote lock kit..

is there a recommended brand/model of electric actuator?

thanks.

__________________
1982 300TD 210K miles ("The Replacement" aka "The Anvil") - SOLD
1979 300SD 245K miles (never ending project)
2007 Pinarello F3:13
1995 Ducati 916 (SOLD, sniff)
1999 Ducati 900SSie (SOLD)

i found these on german ebay and bought a set. i had it sent to my aunt there and she will send it to me. i payed $25, plus shipping, and it looks just what you had in that previous picture. i will post my findings.

__________________

Grey '91 350SDL 214k Dad's car
Beige '81 240D 4 Speed 254k SOLD
Blue '82 300D 225k SOLD
White '95 E300D 46k SOLD
Blue '87 190D 2.5 Turbo 315k SOLD
Brown '80 240D 4 Speed 716k SOLD
Beige '80 300D N/A 119k SOLD
Blue '85 300D Model 186k T-Boned

Pretty much anything.

If your city has a CarToys store, they sell them for about $15 each.

Not much left here , but the PepBoys just up the road finally opened up again. Worst case I see there's some available online.

thanks for the tip

__________________
1982 300TD 210K miles ("The Replacement" aka "The Anvil") - SOLD
1979 300SD 245K miles (never ending project)
2007 Pinarello F3:13
1995 Ducati 916 (SOLD, sniff)
1999 Ducati 900SSie (SOLD)

There's tons of actuators available on eBay.

What I'm proposing is a system that doesn't need actuators. Rather it works directly with the pump.

I wonder if Crutchfield still has the harness? I need to get in touch with them about my stereo so I'll ask.

I'll check the archives and see what comes up.

__________________
1998 E300 +310,000K
1996 E300 +460,000K