power issues
hi guys...
just put almost 1000 miles on my 1980 300sd and now it seems as i have no pickup. the fuel line came off the number 4 injector and i fixed it and even though i am not dropping diesel everywhere, i feel as if there is no pickup and hard to get to cruising speed ie 65-70 mph. i should recheck all my lines to the injectors? if i have a leaking injector(bad seal) which i may have is this going to cause lack of power? i am going in for service today. should i have my injectors flushed? any other ideas would be helpful. thank you. lyle in anaheim |
First thing to do is a simple fuel filter change. Do both filters. 10 minute job. Make sure to fill the secondary filter with some burnable liquid such as diesel fuel, purge, or ATF. Report back.
|
also i think the 80's SD CAME with a turbo, chekc that
|
i have a turbo...this is true...i will change the fuel filters today, no issues there. the best place to buy injectors as i know i need one? would be off this forum?
i will report back once i change the filters. thanks so far. lyle in anaheim |
Lyle,
Welcome back to the diesel world! Do like Kerry Edwards suggested. Also make sure there is no air in the fuel lines. I do not know if this model has an ALDA even though it is a turbo car. If it does have an ALDA, and you did work around the #4 injector, check the hard line between the ALDA and the banjo bolt on the back of the intake. Those hard lines get brittle with age and break easily. A broken hard line will give the condition you are describing. I found that out the hard way my self. |
All times are GMT -4. The time now is 04:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website