PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   OM616/7 Injector Tightening Torque (http://www.peachparts.com/shopforum/diesel-discussion/188713-om616-7-injector-tightening-torque.html)

dieseldan44 05-19-2007 02:13 PM
OM616/7 Injector Tightening Torque
 
...for installing into the engine. Curiosly not in the FSM in the injector articles.

dieseldan44 05-19-2007 02:19 PM
May have answered my own question...
 
In the FSM it seems that the 70-80nm applies to both the injector halves AND installing into the head. Must be a translation thing...

Cervan 05-19-2007 03:16 PM
i allways just did a hell of a lot

toomany MBZ 05-19-2007 04:23 PM
Quote:
Originally Posted by dieseldan44 (Post 1510476)
In the FSM it seems that the 70-80nm applies to both the injector halves AND installing into the head. Must be a translation thing...
70-80nm = 52 to 59 foot pounds

whunter 06-04-2013 04:14 PM
Recycled
 
To answer a member question.

.

greazzer 06-04-2013 04:42 PM
59 ft pounds, no more and same for the halves when re-assembling.

eatont9999 06-04-2013 09:21 PM
I do 55-57Ft/lbs for the injector halves and installing them into the prechambers. No issues so far. I have rebuilt injectors for several people here on this forum and no complaints. Don't torque them too much or you can damage the injector's internals.


All times are GMT -4. The time now is 12:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website