Hi all:

First off, many thanks to the responses to my posts re my "thar she blows" IP delivery valves.

As a refresher, my IP is dropping fuel everywhere (and, yes, it is parked in the street now ) and it appeared that an IP stud was stripped. Based on the presence of "different" washers and nuts, it's clear that the PO messed around a bit...

But now for the good news! The IP stud is _not_ stripped! I painted 'er up with some fine pink nail polish, gave a turn, and sure enough ... the stud is holding firm.

So instead of a rebuilt IP, I've got some new nuts, the seals are in the mail and I can breathe again .

Thanks again to everyone who chimed in!

Happy dieseling;
sga

should have added this to the already existing thread.. so not to cause any issues with the search function.