Quote:
Originally Posted by zeke
My dealer sold me enough for 2 cars for $30. You can also use a preformed hose from a McParts shop, just make sure it has a straight portion that is long enough and cut it down to size, then clamp it REALLY good (it won't fit quite right 'cause it is SAE).
I took off the T-stat housing to replace it on the 240D and the water pump housing on the 300TD. Go the T-stat housing route. MUCH easier....but make sure you have the gasket in hand.
Good luck!
|
So, when the t-stat housing comes off, I don't quite get how to remove/install this hose. How can you get the hose in there w/o lifting or lowering one side of the set up? If the hose is between two parts, how can it be installed w/o cracking or bending the new hose?
09-02-2008, 09:59 PM
Threaded Mode
