![]() |
|
|
|
#1
|
|||
|
|||
![]()
92 330SD is located on the passenger side above the fender cover very close to fire wall. the other side of the line has a filter and a few "Ys" connectors. By the way my A/C is not blowing cold air. Can this hose be related to the A/C.. not working.
|
#2
|
||||
|
||||
That's a vent line for the emission control vacuum devices. I don't know if it hangs loose like that in the engine bay or continues to the cabin, but as a vent it doesn't connect to anything. It has no relevance to AC not blowing cold. For that, check refrigerant pressure.
Sixto 87 300D |
#3
|
|||
|
|||
Hose to nowhere.
Thank you for your reply Mixto, it look like it was conected to something, I can see marks of the fiting. Take a look of the other end of the same hose.
|
#4
|
|||
|
|||
check and see where your EGR vac line leads too.
I think that is where that should go. that elbow fitting goes on top of the EGR .That line feeds through the wall at the bottom right corner of the EDS box. if you follow this line towards the front of the car it should lead to the two vac. transformers(under the air filter box) which one is for the turbo.
__________________
John 1993 300sd 294k (km's) Toronto,Ont Canada |
#5
|
|||
|
|||
sorry I see your egr line, I'll have a look at my car and I'll let you know.
how is i shifting?
__________________
John 1993 300sd 294k (km's) Toronto,Ont Canada |
#6
|
|||
|
|||
Hi mirage1, thank you for responding to my post. Please let me know if you need more pictures.
Victor vmcastillo@verizon.net |
![]() |
Bookmarks |
|
|