What's your boost????
Vote at poll!!!!!
|
Just got a guage this weekend; 13psi at 2400 rpm..
Only 11 - 12 at 4000 though..:confused: |
set mine back to 12.5 psi
|
I'd have to answer <8, but that's just because there is no 0.
|
12.5psi @ 3000PRM
13psi @ 3500RPM |
1985 300td = 10.5~11.0
|
1985 300D Turbo
Max is 10.0
|
boost controller set to 13. It's a good bit higher than I'm making use of, but I am still at 7 or 8 after shifting.
|
well i cant wait for my boost gauge and the manual boost controller coming in 3-4 days :D
|
Cruising at 70mph on a flat surface around 3100rpm....8-9psi.
Going uphill at 75mph under full load....about 11.5-12psi |
Mine will top out at 22psi if I let it. I disconnected my wastegate, but control it via la foot. :)
|
No idea, never checked. My 0-60 is within factory spec so I assume its right.
|
Quote:
I'm not going to turn the boost up, but I am hoping that it helps it build a bit faster..it was cheap, so if nothing happens, oh well. Plus at least I'll have one if I ever decide to try the full load adjustment. |
i am going to go with 11 psi i think 12 is the max w/o any modification.
|
I wouldn't go cranking up the boost on an almost 30 year old motor unless you are willing to start breaking stuff.
Set it to factory spec and leave it. |
All times are GMT -4. The time now is 06:43 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website