Hi,
i started looking at my TPS problems, and from a previous thread got the hint to take a look at the vacuum transducers next to the air box. Well what happened is that the connections on the connector to the transducer corroded and broke off. I took the connector off and cleaned it, and I want to connect the wires to it again, but i am not sure which wire goes where. There are two wires, if someone could please let me know which color goes to what side. The transducer I am talking about is the resonance flap transducer, which is the one that is slightly higher then the same EGR transducer. There is also another part under the transducers, where the connection broke off too. If somebody could tell me what color wire goes where that would be very helpful. Thank you guys for helping me diagnose the problem.