![]() |
|
|
|
|
#1
|
|||
|
|||
![]()
92 300SD I need some guidence. The winshield wiper stop working, lever working all it's funtions but the wipers and I check the fueses at front under the hood driver side and the fuese at trunk. test all fuses and their are fine. Please advise
|
#2
|
|||
|
|||
Don't know if this helps, but in my car, I had two occasions where the washer, and then the wipers would just stop working. In both instances, it ended up being the fuse in the engine compartment. The fuse itself is good, but the prongs of the fuse would build up oxidation, and eventually stop the wipers from working. If I were you, I would remove the fuse, and use electronic contact cleaner on the prongs and fuse socket. Good luck!!
__________________
96 E300d |
#3
|
||||
|
||||
Quote:
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
#4
|
|||
|
|||
![]()
I was looking at some forums and learn the location of the rely for the wipers. Guess what? I tap the relay twice and wipers start working again. Thank you guys for all your help and advices. Now I know the fuses boxes can also be a problem and find also a solution for the problem.
![]() Quote:
|
![]() |
Bookmarks |
|
|