|
|
|
|
|
|
|
#1
05-20-2009, 07:46 PM
|
|||
|
|||
|
96 E300 will not start
Hi,
have a 96 E300D and it will not start. I drove it to a auto body shop 2 months ago and they have been working on it slowly. I went to pick the car up and the battery was dead. There was also little fuel in the tank. I put in a new battery and put in some diesel, and it will not start. I scanned the codes, and i got 6 of the same codes. I got P0200 saying injector ckt open. Now i do not know what electrical parts to check. The k-40 relay is brand(installed it a month before auto body shop). It also might have sucked in air into the system. Any ideas?? 
|
|
#2
05-20-2009, 07:53 PM
|
|||
|
|||
|
i forgot to mention that i tried spraying some wd40 into the air cleaner and the motor starts for a slight second and shuts off.
|
|
#3
05-20-2009, 09:59 PM
|
||||
|
||||
|
Check the fuel filter and see if it's full of fuel. If not, you can pour some in and it will help it get primed if for some reason it was run out of fuel.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250
|
|
#4
05-21-2009, 08:47 AM
|
|||
|
|||
|
They are self priming, however I would replace all of the clear fuel lines. Especially with an empty tank the pump has to "pull" extra hard. It wouldnt hurt to fill the filter and give it a shot, but this is classic symptom of needing fuel lines
__________________
Dennis 2006 E320 CDI Black/Black Leather. Nav, HTD Seats HK stereo 32000 miles. 2000 VW Passat 1.8t 300,000 miles as of Dec 09, 2009 original owner 1997 E300d Silver 300,000 miles As of Jan 05, 2010 3rd owner SOLD
|
|
#5
05-21-2009, 10:04 AM
|
|||
|
|||
|
With both the front window and hood open, turn key to pos 2 and listen for the SOV (black valve on side of the IP) click open. No click, no start.
__________________
Terry Allison N. Calif. & Boca Chica, Panama 09' E320 Bluetec 77k (USA) 09' Hyundai Santa Fe Diesel 48k (S.A.)
|
 |
| Bookmarks |
|
|
Hybrid Mode
