4 Speed Conversion Kit - Should I buy?

[veggie190]

Does this look like a good 4 speed conversion kit? I've done quite a bit of reading on the forum about doing a swap and from my knowledge I want to buy (ideally it would have a 300td manual flywheel...) I would be swapping it into my 1983 300td.

Here's the add and photos-

Mercedes 300D 4 Speed Conversion - $425

I have all the parts needed to convert any diesel W123 chassis...240d 300d 300cd 300td.. to a 4 speed
Both shafts and both cross members to do either a 240 or 300
The only thing you need to do is if installing in a 300D is shorten the shifter linkage by about 4 inches.
The flywheel is from a 240 so it is about 10 pounds lighter. I have used a set up like this in another 300 and with the lighter flywheel it is a little faster to rev.

Included:
240d flywheel
clutch plate
clutch cover
throw out / release bearing
4 spd trans 240d the 240 was under 150k and wrecked- trans shifts through all gears and turns smoothly.
Shifter
300d trans crossmember for manual trans
300d front section drive shaft for manual trans
240d trans crossmember for manual trans
240d front section drive shaft for manual trans
240d shift linkage
Pedal assembly with clutch master
clutch hose
nuts and bolts