|
|
|
|
|
#1
06-03-2009, 08:33 AM
|
||||
|
||||
|
Anyone replace a window motor in a w126?
I decided to troubleshoot the windows on my 1982 300SD, three of which don't work. I tested all of the switches in the console with the remaining good window and they all work as they should. Then, I took the driver's door panel off and tested the leads to the window motor. Again, it checked out fine (12V on each lead, each grounds when switch activated) which narrows it down to the motor itself. Now, I checked the FSM and it states that removal requires one to roll down the window. Call me crazy, but you probably wouldn't be taking out the regulator or motor if the window worked
 ...anyway I was wondering if anyone had taken out the motor with the window up? Does it need to be taken out as an assembly with the regulator (looked that way, and FSM specified it), or can I somehow just take the motor out and replace? Anyone rebuilt one of these?TYIA, TC
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth 
|
| Bookmarks |
|
|
Threaded Mode
