I might have found the mistery coolant leak E300 turbo diesel - Page 2 - PeachParts Mercedes-Benz Forum

pawoSD · #16 01-16-2010, 11:58 PM

Quote:

Originally Posted by Skid Row Joe

Negative. Look again. SDs will eat the hose nearest the PS pulley alive. Don't change EMs - you'll eat through the hose.

You're thinking of the Oil Cooler lines. The upper line is at risk of being hit depending how it is installed (I angled mine away) if the motor mount collapses. The radiator hose would actually end up farther away from the pulley if the mounts collapse.

Olivier · #17 01-17-2010, 05:13 AM

Quote:

Originally Posted by michakaveli

Oliver,

I had the same issue with my upper radiator hose. I figured out what the problem with mine was. It was mounted backwards. When mounted the correct way, the hose clears the power steering pump.

The way it was fit is the way factory fitted it. I checked on many pictures on the net and defo it was mounted the way it came out the factory.

layback40 · #18 01-17-2010, 07:41 AM

I had the alt pulley rub on the bottom hose on my 1980 300d after I tightened the fan belt. It only rubbed when it idled rough when cold. it took about a week before it failed. When I put the new hose on , I twisted it slightly so it was always at least 1" from the pulley. It only happened because the belt adjustment was at its limit.

Skid Row Joe · #19 01-17-2010, 12:52 PM

There ya go.

OP, another possibility......the tensioner pulley on the serpentine belt may be losing tension.

Olivier · #20 01-19-2010, 02:50 PM

Still leaking here... I think it now comw from the water pump... Is there a way to rebuild those od the whole unit need to be replaced?
Cheers.
Olivier

Olivier · #21 01-25-2010, 09:03 AM

it was the water pump as well, it as been changed yesterday and no more leaks, so far...