I need to replace the flex pipe between the turbo and the exhaust of my 85 300SD Cal.

Would this part fit the Cal?

http://catalog.peachparts.com/item.wws?sku=6171420059

Looks like it should but I am not sure.

Here is a pic of the turbo:


Thanks

Attached Thumbnails

   

https://epc.startekinfo.com/epc/welcome.jsp

that is free, it tells all.

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]

The epc is very helpful.
That part should work, but Cali's are a bit different. Call Phil.

__________________
83 SD

84 CD

I tried EPC but it does not support Mac OS yet.

I called Phil.

Thanks

Frederic

That's true, part #617 098 01 04.

Attached Thumbnails

 

__________________
83 SD

84 CD

Thank you very much. Fastlane did not have it, $57 at the MB dealership.

Frederic

No prob.
Doesn't surprise me, an odd item to replace by itself.
May want a new seal ring too, (#53 in pic) 004 997 54 48.

__________________
83 SD

84 CD

I don't think that is the right part number. That appears to go between the Intake manifold and turbo.

I believe the correct part is #65 on the picture below, Part number: A 617 142 00 59







.

Attached Thumbnails

 

__________________
1983 123.133 California
- GreaseCar Veg System

Well that's a Cali pic you have. The pic I provided is from the epc, 126.120. Note the square item, #29, that goes to the engine. I understand the turbo is bolted to the manifold without any flex pipe.
Pics are gold, CD, white SD, circle is of starter.

Attached Thumbnails

   

__________________
83 SD

84 CD

Reviving this thread because I have a leak around the turbo/manifold interface. Has anyone actually seen failure of the red circled #50 connector in toomany's post? I plan on getting a manifold kit and it includes the #53 seal, but I'm wondering if I need the connector too.

__________________
1984 300D Light Blue/Blue
2006 C280 Silver/Black

What about the Part# for the black rubber/or silicone vacuum pod of the turbo air recirculating valve? Please? Thanks!

__________________
'85 300D Turbo - CA Version

^ Is that in the diagram above?

__________________
83 SD

84 CD

It's not in his diagram but he happened to be a have access on the EPC and it seems like he has more knowledge than you who pointed out on the wrong part instead of the correct part that the original poster is asking for, hence the reason I elected to ask him instead of you, sorry.

__________________
'85 300D Turbo - CA Version

No prob.

__________________
83 SD

84 CD

I don't have access to the individual Mercedes part numbers, only the part number for the whole turbo - 002 096 43 99.

Looking the part number up, it is a Garrett T0A314 (not sure the name for Triple K with ARV but I think the MB part number is this - 002 096 16 99 )

Per the Turbo Master site in Spanish.
http://www.turbomaster.info/eng/garrett_parts_list/466424-0001.php

Translated.
http://babelfish.yahoo.com/translate_url?doit=done&tt=url&intl=1&fr=bf-res&trurl=http%3A%2F%2Fwww.turbomaster.info%2Feng%2Fgarrett_parts_list%2F466424-0001.php&lp=es_en&btnTrUrl=Translate

Excerpt -

Garrett Part Number, Description, Qty
431342-0002, Adapter (val. recirculation), 1
431311-0001, Cover (val. recirculation), 1
431343-0002, Together (val. recirculation), 1
400724-0616, Screw (val. recirculation), 3
431138-0002, Wharf (val. recirculation), 1
400724-0630, Screw (val. recirculation), 3
431076-0002, Piston (val. recirculation), 1
430996-0005, Detent (val. recirculation), 1
430956-0005, Diaphragm (val. recirculation), 1
431288-0001, Racor (val. recirculation), 1


I am not 100% if this is correct, but hopefully it will help lead you in the right direction.




.

__________________
1983 123.133 California
- GreaseCar Veg System