|
|
|
#1
|
|||
|
|||
HELP ! need a tranny cooler line.
must have lost one of the rubber bushings that protects the tranny cooler line on the pass side the clamp wore a hole in the line 1985 300d . Anyone have one for sale ? this is the hard metal line .
|
#2
|
|||
|
|||
You might just need to extend the rubber line to reach it--then grommet/protect it accordingly.
__________________
James Marriott 2003 Buick Regal 1983 300D (228k, frau Auto) 1996 Suburban K2500 (192k, 6.5 turbo diesel/4WD towmaster 10,000) www.engineeringworks.biz 1987 300SDL junker 170k 1982 300SD junker, 265k |
#3
|
||||
|
||||
I just did this fix. I used 3/8 fuel injection line to put the two back together. It's rated for over 100PSI, which the line will never see.
__________________
79 MB 280 SEL Euro 133k 77 MB 450SL 154k 05 Mustang GT Vert (3) 104k 12 TSX Wagon Tech (66k) (192k) 06 Subaru Outback base (135k) 164k 16 Acura MDX (109k) 111k 18 Silverado 2500 LTZ Midnight (212) 56k 97 Ford Ranger 163k 11 RAV4 154k 01 Escape 173k 04 Honda Pilot 292k 1967 Mustang (Resto Project) 1968 Mustang (Parts Bin) 00 Ford Ranger 124k |
#4
|
|||
|
|||
I once ran mine like that for about a week with no problem until I could get the replacement line from the dealer. It's a good band-aid.
|
#5
|
||||
|
||||
Yeah, Craig, I shouldn't have called it a fix like I did. Your description is more fitting.
__________________
79 MB 280 SEL Euro 133k 77 MB 450SL 154k 05 Mustang GT Vert (3) 104k 12 TSX Wagon Tech (66k) (192k) 06 Subaru Outback base (135k) 164k 16 Acura MDX (109k) 111k 18 Silverado 2500 LTZ Midnight (212) 56k 97 Ford Ranger 163k 11 RAV4 154k 01 Escape 173k 04 Honda Pilot 292k 1967 Mustang (Resto Project) 1968 Mustang (Parts Bin) 00 Ford Ranger 124k |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|