I need to replace the inner front sway bar bushings on my 84 300d that are located beneath the brake booster and the battery tray. The new bushings are split so that they can be slipped over the bar, but I am unsure if doing this is the correct procedure? Is there any need to put them on from the upper control arm end of the sway bar? Does the car need to be on the ground or supported by jack stands? Are the original bushings split so that they will come off the sway bar, or will I have to cut them if I dont take the bar loose from the UCA? Any tips, info, or tricks would be greatly appreciated. It seems like a pretty simple job, but I dont want to be surprised in the middle of the job. Thanks!