Fellas,
I'm going to be doing the headgasket on my 99' E300 over 4th of July vacation. I've been doing research on the website and found various member posts containing valuable information. The one thing I cannot find is a complete list of parts. Many parts are listed in the various posts, but I'm piece-mailing everything together. I wanted to post my list here and then hopefully have other members chime in on parts, and their numbers, needed to complete this job. Maybe it could be something for the Wiki if it gets completed?
Any help on adding to my list of parts is truly appreciated. Also, any "while you're in there (injector test, glow plug replacements planned)" additional project suggestions are appreciated.
Part List:
Cylinder Head Gasket Kit (head gasket, intake manifold gasket, exhaust manifold gasket, O-rings for "bushes" of the trim cover, fuel injector heat shields, six O-rings that seal between the top of the cylinder head and the camshaft housing)
Fastlane Part # W0133-1717655

Cylinder Head Bolts
10 x 102mm (20 count)
Fastlane # W0133-1641814
10 x 115mm (6 count)
Fastlane # W0133-1642393

Fabric Fuel Hose
A 605 078 05 81 (count 1)

Stub cap for injector/fuel hose
A 605 070 00 55 (count 1)

Fuel line clips
A 603 078 01 41 (count 7)

EGR to intercooler O-Ring
A 606 997 06 45

Timing Chain Guide Rail Pins
#Part number?

Special Tool List:
Cylinder head lifting brackets (Do I really need these if I have three people to help lift it?)
# 119 589 01 40 00

10mm Triple Square Head Bolt Tool (probably just buy from auto parts store)
#part number?

Injector Removal Tool (I’ll probably just end up using a 22mm deep socket Craftsman)
# Part Number?

Glow Plug Reamer (Trying to get from Diesel 911; otherwise will order from fastlane)
# Part Number?

__________________
Ed
-1984 Mercedes 190D 2.2 5-speed gray market(bought@30,000 miles) (Sold back to original owner@170,000 miles)
-1999 Mercedes E300DT (245,000 miles)
-1999 Mercedes S500 Grand Edition (80,000 miles)