|
|
|
|
|
|
|
#1
08-30-2011, 08:34 PM
|
||||
|
||||
|
Receiver/drier temp question.
My receiver measures about 125 deg when running with an outside temp of 85 deg. I'm running an unorthodox system but what are normal operating temps with a standard setup?
High pressures were 200 psi at about 1500 rpms. I didn't check the temp when the gauges were hooked up...
__________________
My occupational hazard bein' my occupation's just not around... 1980 300SD 1980 300SD 
|
|
#3
08-30-2011, 11:56 PM
|
||||
|
||||
|
normal temps should be around 5 to 10 degrees F below the vapor point. so at 200psi, the receiver temp should be no more than, 125
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 560SL convertible 1987 190D 2.5-5SPEED!!!  1987 300TD 2005 Dodge Sprinter 2500 158"WB 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
|
#4
08-31-2011, 01:30 AM
|
||||
|
||||
|
Sounds like it's in the ballpark then John. My thermometer was reading between 100-125 deg.
I'm pretty happy with it Jim! Some of the results are in the "orifice tube" thread.
__________________
My occupational hazard bein' my occupation's just not around... 1980 300SD 1980 300SD
|
 |
| Bookmarks |
|
|
Hybrid Mode
