Routing excess oil separator out of engine bay
 

Hey guys,


I bought this intake kit:

Mercedes Diesel Performance Air Intake Kit 300D | eBay

Probably way overpriced, probably could've made a DIY one for way less, but I really like it and it looks great in the engine bay, also gives the turbo a sweet sound.

The shorter, upper separator gets the actual oil to the oil return line and the blow by to the longer tube. The longer collector vents the blow by out and collects any oil that makes it out. The collector just vents out into a long hose which you just kind of tuck under the battery tray into the back of the engine bay.

Great design IMO, but I have one of those engines that despite having terrific signs of life, just has a bit more blow by than it should. I've learned not to worry, but the tube just vents it out into the engine bay and makes my engine bay kinda smoky when the car is running.

Not a huge deal, but something I'd like to maybe resolve. I had an idea of going down the exhaust, and drilling a hole in the mid-pipe region, and getting a little threaded tube fitting, then just mounting a longer hose to the collector and running the hose to the fitting on the exhaust. This would just vent the blow by into the exhaust and out the back of the car.

Is this a good idea? As in, would I have to worry about the exhaust trying to push its way up the tube and into the collector, thus creating pressure in the whole system? Or do you think the exhaust would flow by it and let the blow by just flow in with it?

that blowbye really needs to go back into the intake. you could drill and tap that metal elbow and install a hose barb, or use one of these on your silicone reducer: http://www.siliconeintakes.com/product_info.php?cPath=12&products_id=500&osCsid=70b92d508f5fa389a2206159c3f5c625

did you see my version? time to pimp my thread...

http://www.peachparts.com/shopforum/diesel-discussion/327970-catch-can-cold-hot-air-intake-how.html

Drill a hole in the tube right after the air filter and route the blowby back into the turbo. That's what MB did on the early 617's in the 116 chassis.

By the way, I don't get the point of that kit. I see no advantage over the OE setup.

The advantage is purely on the seller side of the equation. :D

Ugh. another member lowering the performance of his vehicle to gain turbo whine and poorly filtered air to the engine.

lets see some pics of it installed on your car.

you understand the stock air filter flows MORE air than the car can possibly use right? I understand that the rattling broken mount is SUPREMELY annoying, and hearing that turbo whine is appealing to say the least, but it will get annoying after time, and the foam/oil filters really cannot filter the volume of air a diesel ingests!
I would route the smokey air back into the intake as pgirngo suggests. I'd also change that filter to at least a paper element, and install a heat shield to surround it, and get a fresh air intake routed into the box.

one advantage is "what you don't see."

s p a c e

via removal of the stock monstrosity.

You're probably right. The only thing I liked about it was that the oil separator seems a lot more effective than the original. Maybe mine wasn't functioning properly. I don't know. But I enjoy it well enough.

I will trust the technical aspect of your post and look ino those parts. That makes enough sense. Albeit, I haven't noticed any decrease in performance, if anything, the engine seems to breath better at higher revs. But I trust that you're one of the members on here who knows what they're talking about.

As for your opinionated prediction on how you think I will feel about something on my own car, thank you, but no thank you.
This is it. Among other things, it frees up a lot of space. I was just looking for an idea of what to do with the excess air. I suspected filtering back into the intake, but wasn't sure. I have my answer now. Thanks guys!

vstech knows his stuff for sure. The bracket isnt really a huge problem. The best solution is to just weld in additional metal. Did that on both 300SD's, not a problem since.

Frees up a lot of space to do what though?

You`re young, go for it, but in the end when you get through spinning your wheels trying to modify everything. you will just drive them and enjoy them. other things will take up your time.

wife, kids, working, paying bills/taxes, rent. house payment, trying to survive, paying off the ex/alamony, (all the money) child support. :D

Yeah VSTECH knows what he is talking about for sure.

Charlie

clean grime. access wiring/sensors. adjust mbc. visual inspection.

You're so right. Cant wait to be spinning my wheels in my 120hp Mercedes! Did you ever stop to think maybe this is how I enjoy my car? You enjoy yours differently. Luckily, I do not have all of those things to worry about yet. Hopefully I wont have half of them. Going to try and make good decisions in my life.

Yep. I really just mainly enjoy how it looks in the engine bay over all.

Young bucks...

What is the problem here? I asked a simple question and it always turns into this condescending argument.

It's clearly a bargain at any price

Can the mods close this thread? I have my answer for the tech aspect of the question. Anything else from here would only be needless banter.