|
|
|
|
|
#1
03-09-2014, 04:28 PM
|
|||
|
|||
|
WTB 81-84 w126/w201 door lock vaccum pump
#126 800 0348 or #000 800 0348
Pick and Pull charges $6.99 (if I could find one) and a google search shows new ones available for $172.80. Id be happy to pay $30 for a good used one if anyone has a working one they would sell. 
|
|
#2
03-09-2014, 04:44 PM
|
||||
|
||||
|
I have one I pulled from my parts car before I scrapped it, still sitting in the garage.
I have no idea what it'd cost to ship to wherever you are though, so you might be money ahead to get one from Pick N Pull.
__________________
-Josh Testing the cheap Mercedes axiom, one bolt at a time...
|
|
#4
03-09-2014, 07:02 PM
|
||||
|
||||
|
Check the connector to make sure it is compatible. The earlier SD's vac pump had a two wire connector and the later ones had 3. Make sure it will mate up with your SD.
|
|
#6
03-09-2014, 08:52 PM
|
||||
|
||||
|
That should work. I just purchased one for an 81 SD and was sent the wrong one because I did not give them the stock number. They replaced it with the proper one with no static and it works fine.
Let us know how it goes. I think I paid about $100.
|
|
#7
03-10-2014, 11:33 AM
|
||||
|
||||
|
I'll have to look at what part number is on the pump I salvaged, as well as powering it up to see if it actually works.
I pulled it from a front end collision car that I bought for the power train, and then salvaged just about every thing else from before letting the wreckers have it. If need be, I can also check the local Picknpull for you, as we have one only a couple of miles from where I am.
__________________
-Josh Testing the cheap Mercedes axiom, one bolt at a time...
|
|
#11
03-11-2014, 08:12 PM
|
||||
|
||||
|
That's why we try to keep an eye out for each other. Just saved some shipping charges.
|
 |
| Bookmarks |
|
|
Linear Mode
