|
How hot should a Becker radio get?
I removed the Blauphunkt AM/FM/Tape deck in my latest 1983 300SD and installed a used Becker radio that is from the same era and style vehicle. I noticed during testing that the unit got quite hot on the side facing the driver. It was hot enough after maybe 10-15 minutes that I risked a burn if I touched it. Having nothing to compare it to as my other 300SD is in the paint shop, I'm not sure if this is normal or not. I know they get warm but how warm is the question. I also noticed that the LCD display is missing a character and after 20 minutes of driving, the left side audio channel cuts out. It is probably over heating and I need to find another unit. I have a 3rd Becker but guess where it is? Yep, Maaco, on the floor of the 300SD...
__________________
1991 F250 super-cab 7.3 IDI. (rebuilt by me) Banks Sidewinder turbo, hydroboost brakes, new IP and injectors.
2003 S430 - 107K
1983 300SD - Tanoshii - mostly restored ~400K+.
1983 300SD - Good interior. Engine finally tamed ~250K.
Monark Nozzle Install Video - http://tinyurl.com/ptd2tge
|
04-10-2014, 06:53 PM
Threaded Mode
