Help identifying part
 

While looking for vacuum leaks I broke this rubber boot off. I can't find a part number on this thing. Its bolted to the side of the injection pump. Connected to the bottom hose of the 5 way splitter coming off the vacuum pump. There is a piece of the rubber stuck inside. Can i just get boot or do I need to buy whole part?

http://i1312.photobucket.com/albums/...psf5e3273f.jpg

http://i1312.photobucket.com/albums/...ps8ce4a24b.jpg

http://i1312.photobucket.com/albums/...ps3da9a12f.jpg

I found it. Vacuum control valve. Part number 123 300 10 33. I pulled the one off my doner motor in the garage. The hard line was siliconed in the hole but as long as it works and saves me from buying $180 part for a rubber boot.

This was a tight fit but it does the job -

http://i196.photobucket.com/albums/a...V/IMG_8611.jpg

Don't worry about the bit that fell into the VCV. Nothing goes on in there that it would upset.

Sixto
MB-less