|
|
|
#1
|
|||
|
|||
Help identifying part
While looking for vacuum leaks I broke this rubber boot off. I can't find a part number on this thing. Its bolted to the side of the injection pump. Connected to the bottom hose of the 5 way splitter coming off the vacuum pump. There is a piece of the rubber stuck inside. Can i just get boot or do I need to buy whole part?
__________________
1987 300 SDL 2000 E320 Wagon |
#2
|
|||
|
|||
I found it. Vacuum control valve. Part number 123 300 10 33. I pulled the one off my doner motor in the garage. The hard line was siliconed in the hole but as long as it works and saves me from buying $180 part for a rubber boot.
__________________
1987 300 SDL 2000 E320 Wagon |
#3
|
||||
|
||||
This was a tight fit but it does the job -
Don't worry about the bit that fell into the VCV. Nothing goes on in there that it would upset. Sixto MB-less |
Bookmarks |
|
|