I am not what the deal is with that. They are all the same size. They are laser cut, so I doubt you got one a different size. If you could take a photo, I can get a better idea of what is going on.....Rich

Do you perhaps have blank off plates for older V8 Benz motors like 450 SEL?

I am not sure if they are the same. How about a photo.

OK please see attached for a pic of the actual gasket.

The approximate measurements:
Between the centre points of the mounting holes: 66mm
Longest distance (at outside point of the mounting holes): 73 mm
Shortest distance, outer edge of "top" and "bottom": 44mm

Hope this makes sense:)

Not to worry I got a local shop to cut me a few with a flowjet.

I'm having the same problem with my 82 240D. The disk won't stay centered and the clamp doesn't catch it all the way around. I think I'm gonna try to hold it in place with some electrical tape and then put the clamp on it. Or maybe some gasket maker.

Electrical tape didn't work. I dropped the disk and it rolled away somewhere, I couldn't find it. So I removed the EGR tube from the EGR, then I cut a piece of sheet metal (like HVAC ductwork metal) into a round disk that fit into the fluted end of the EGR tube to block it. Then I bolted the EGR tube with the disk inside it back onto the manifold. That worked fine. I'm thinking about taking it back apart, cutting the end off the tube, and reinstalling that, but who knows, maybe I'll skip it. I'm just concerned about water getting into the tube and rusting it out. But I probably won't have the car that many years anyway lol.

Any Kits available?

I just made a block off out of a old jelly jar lid..
Took about 30min, so far so good!

Yes- PM for details

Delete kit
 

Still got egr delete kit for 603 Mercedes?
I need one

Payment?

Abram

Still got delete kit for 603 Mercedes?

Delete kit info?

Cut up a soda can and put it under the EGR valve face.

4 posts in almost 7 years
 

:eek: diet or regular :confused:

Diet. It'll lower emissions!:D

PM or email: wvobenzs@yahoo.com

Test pipe and EGR plate W123 1985 300d
 

I need a test pipe to delete the trap O and the EGR plate on my off road Mercedes 1985 300d
Thank you

The EGR plate comes with the bypass pipe. PM for details.

Are the EGR delete kit still available

Same over here, looking for this item...

If you're still selling these kits, I'd like one

Please private message.

Can you ship this kit on Finland? I send you private message.

EGR delete
 

Hi, interested in the delete kit, I am new to the forum, let me on payment and shipping.

EGR delete
 

Hi, interested in the EGR delete, let me on payment and shipping. thanks.

I did send a PM about one for a w124. Never got a reply back.

Sorry about that, I must have missed it. I looked and found your PM, but did not find a reply. Again, sorry.

No problem. I made one that works for now. That said, I will also buy one form you, as I know the quality of your stuff is very good.

Just PM'd you Roll, thanks!

Rich are you still selling kits?

Yes, and the price is now $30 each including shipping. PM for details.

Known Scammer
 

DO NOT SEND ANY MONEY TO DONBOOB415@GMAIL.COM. HE IS A KNOWN SCAMMER.