|
|
|
|
|
|
|
#1
05-23-2015, 03:32 PM
|
|||
|
|||
|
EPC check please
I need a new fan blade for my e300. Does a c220 or 280 90s vintage fan fit or likewise for a e300? Not sure of the model year as it is in a JY, but if someone has access to the EPC and can cross check that would be great. It looks like it does on one online parts diagram, but....
Not sure what has happened, but the fan has rubbed or otherwise hacked a piece out of the shroud and one blade is damaged and two others have split at the top. There is room between the fan and radiator and I didnt see any damage lower down, just at the top. I dont think I left a tool behind, but am wondering if somehow the engine tilted forward.
__________________
Treetops 06 E320 CDI 127K Miles 87 300TD 231K Miles 99 E300 269K Miles-Sold 
|
|
#2
05-23-2015, 05:34 PM
|
||||
|
||||
|
The gasser fans rotate the other direction from what I understand.
Pelican has the OE fan blade $75 or Trucktec aftermarket $29.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech
|
 |
| Bookmarks |
|
|
Hybrid Mode
