Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-22-2016, 04:40 PM
Registered User
 
Join Date: Sep 2012
Location: Augusta, Ga
Posts: 79
Oil cooler

If you run Mobil 1 5w40 TD,. with virtually no thermal breakdown do you actually need an oil cooler? The idea is to plug the lines at the oil filter instead of replacing the lines.

__________________
1990 350 SDL
Currently: 180,000 miles
Factory rebuilt bottom end rods, bearings and head gasket @ 75,000 in 1997
Reply With Quote
  #2  
Old 05-22-2016, 05:02 PM
Registered Hack
 
Join Date: Mar 2008
Posts: 4,642
oil coolers are not focused on increasing the longevity of oil. They improve the longevity of the engine.

By cooling the pistons (in this case), they reduce excessive wear.

removing the oil cooler permanently is not a wise decision if you plan to drive the car regularly and dependably.

It may not be a big issue if its a temporary removal and the driving is done very gently.
__________________

Reply With Quote
  #3  
Old 05-22-2016, 05:05 PM
Registered Hack
 
Join Date: Mar 2008
Posts: 4,642
And, if this is for that 'factory rebuilt bottom end' on the engine that is known for bending rods..... don't even think about it. ($.02)
__________________

Reply With Quote
  #4  
Old 05-22-2016, 10:01 PM
Registered User
 
Join Date: Jul 2013
Location: PNW
Posts: 121
The oil cooler thermostat in my 78 300SD is not opening up for the oil cooler, and the engine runs hot in anything but cold weather. I agree that you need the oil cooler for the engines sake.

W.
Reply With Quote
  #5  
Old 05-22-2016, 10:13 PM
Registered User
 
Join Date: Sep 2012
Location: Wilmington, NC by the Atlantic ocean
Posts: 2,530
I do not run the cooler on my race engine. However, it only runs for a mile at a time and so far the oil temp has always remained under 175 F or so. I'm NOT, however, recommending this for a street driven car.

BTW, neither would I recommend plugging the cooler lines even if just for a short time. Instead, loop the lines at the oil filter base from inlet to outlet so the flow path remains intact. (BTW, that's also where I installed my oil pressure sender). As well as I was able to trace the oil flow path it seemed like the oil might be circulating thru that path and maybe to critical engine bits - why find out the hard way!!??

Dan
Reply With Quote
  #6  
Old 05-23-2016, 06:56 AM
Registered User
 
Join Date: Sep 2012
Location: Augusta, Ga
Posts: 79
Quote:
Originally Posted by jt20 View Post
And, if this is for that 'factory rebuilt bottom end' on the engine that is known for bending rods..... don't even think about it. ($.02)
The 350 is in excellent condition. No issues here. My post is related to reading other posting. Just information question
__________________
1990 350 SDL
Currently: 180,000 miles
Factory rebuilt bottom end rods, bearings and head gasket @ 75,000 in 1997
Reply With Quote
  #7  
Old 05-24-2016, 07:48 PM
Registered User
 
Join Date: Jan 2015
Location: northern IL
Posts: 267
In general, diesels have three paths to shed heat: coolant, oil, exhaust. While your oil may not break down from the higher temp due to a lack of oil cooler, the engine will suffer. The pistons get a shot of oil directed at their underside to absorb & carry off heat from the crown. Keep the cooler, your engine will thank you.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page