Good Day!

Is it possible to take the ignition out of the car and take it to a locksmith to rebuild the tumblers?

My key has been "sticking" for about a month and a half. I put it in the ignition and it does not turn. A little jiggling and it turns.

About a month ago, I took out the ignition and lubed it. I used a Dupont lubricant that evaporated and left a layer of teflon. This did not fix the problem and seemed to make it worse.

The ignition was not put back in the car until it was completely dry. Also, there was a bunch of greasy gunk that came out of it.

I have purchased a brand new key from my local Mercedes dealer for around $45. It does not turn at all!

Can I take out the ignition and get it "rebuilt" at a locksmith or is it something I need to order or is it not repairable?

Thank You in Advance!

glenn
(87 300 TDT Wagon)

__________________
1988 300 TE - Schnitzel (Daily Driver)
1995 E300 - Betty (Son's Daily Driver)

1987 300 TD - Kraut (Dropped a valve)

1987 300 D - Hans (Need to rebuild engine)