Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-05-2016, 03:29 PM
Registered User
 
Join Date: Jul 2004
Location: Barrington, RI
Posts: 5,874
To what extent can I safely overfill the power steering reservoir?

On the 98 E300, the rate at which the steering rack leaks seems to vary. The Lucas product I put in helped considerably, but now the leak rate seems to be on the increase. Yes, I know I simply need to replace the rack. But I'm determined to delay as long as possible.

So....if I want to overfill the reservoir, do I simply need to make sure there's a bit of space in there when the fluid is at its hottest? I assume that overfilling to the point of no air space would result in too much pressure.

__________________
14 E250 Bluetec "Sinclair", Palladium Silver on Black, 153k miles
06 E320 CDI "Rutherford", Black on Tan, 171k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver, 142k mi, wastegate conversion

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife
Reply With Quote
  #2  
Old 09-05-2016, 03:34 PM
sixto's Avatar
smoke gets in your eyes
 
Join Date: Jun 2000
Location: Eastern TN
Posts: 20,841
... Which might result in blowing a seal. Maybe you should top it off immediately after a long windy drive.

Sixto
83 300SD
Reply With Quote
  #3  
Old 09-05-2016, 06:09 PM
Jeremy5848's Avatar
Registered Biodiesel User
 
Join Date: Mar 2006
Location: Sonoma Wine Country
Posts: 8,402
I suspect over-filling would simply result in an overflow of fluid from the reservoir. I don't know how tight the cap on that kind of reservoir is. Filling when hottest is certainly wise; you should be able to fill to close to the top of the neck.
Reply With Quote
  #4  
Old 09-05-2016, 07:53 PM
Registered User
 
Join Date: Jan 2012
Posts: 7,534
Overfilling level depends on if the system has a vented or non vented cap.

A vented cap system can probably be overfilled by the distance between add and full. If the steering wheel is turned with the engine off, fluid might be pushed through the vent and make a mess. ( this is the limiting factor for overfilling )

A non vented system needs an air space to allow for fluid expansion ( heat ) , so I'd call 1/2 of the add to full distance. Late 90's GM front drive cars had a non vented cap and if the system was slightly overfilled, steering turned with engine off, it can push the return hose off the barb. ( as steering is turned, fluid is pumped out of the power cylinder and into the reservoir. )

A quick way to make a vented system is to pull the cap gasket.

At some point the rack may go 100% fail without warning so unless there are $ or time constraints, changing sooner rather than later is better.

Trying to get more miles from the existing one in hopes that the replacement will " last longer" is false economy especially once the cost of additives and fluid is taken into account. If the replacement lasts as long as the original, it isn't going to matter much if it lasts 320 K or 325 K assuming the car is still worth fixing at that point.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page