![]() |
|
|
|
#1
|
|||
|
|||
85SD door lock key stuck
The attached pic is of the passenger door handle from an 85SD parts car. My intent is to rekey all of the locks on the 84SD to match another driving 85SD. I removed the door handle. There are 2 holes that used to hold roll pins. The roll pins have been drilled out but the key is stuck in the lock. The lock cylinder turns easily but the key won't come out and the lock cylinder won't come out.
The front hole is a blind hole and the other one goes all the way through. What's the trick to getting the lock apart or atleast the key out?
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do. |
#2
|
||||
|
||||
The key should come out anyway. If it's stuck in the lock, the pins in the tumbler are probably seized up. Try spraying some penetrating oil down in there and give it sometime to work it's magic then jiggle the key and see if you can get it to break loose.
Also, those roll pins are designed to be punched out, not drilled out. They can be reused many times as long as they still have some tension.
__________________
Current stable: 1995 E320 157K (Nancy) 1983 500SL 125K (SLoL) Gone but not forgotten: 1986 300SDL (RIP) 1991 350SD 1991 560SEL 1990 560SEL 1986 500SEL Euro (Rusted to nothing at 47K!) Gone and wanting to forget: 1985 524TD 167K (TotalDumpster™) [Definitely NOT a Benz] |
#3
|
|||
|
|||
Soak it in something that will clean the tumblers. Use your imagination.
__________________
84 300SD 85 380SE 83 528e 95 318ic |
![]() |
Bookmarks |
|
|