|
|
|
|
|
#1
02-28-2017, 06:34 PM
|
|||
|
|||
|
Proper procedure to replace vacuum modulator 92 300d
So after reading some threads I decided to order a new updated vacuum modulator and shift technologies kit for the valve body. I swapped fluid a while ago so i know room is tight. Do i need to lower the trans on the w124 chassis? Also where do i find the proper trans pressure spec to adjust the new modulator?
|
|
#2
03-05-2017, 10:56 AM
|
|||
|
|||
|
so no one has ever done this on a 92?
|
|
#3
03-05-2017, 11:25 AM
|
|||
|
|||
|
I haven't, but this thread may be helpful:
DIY W201 Transmission Modulator Removal, Replace, Trobleshooting & Common Problems - Mercedes-Benz Forum From a web search: It looks like your transmission should be the 722.418 with the red or black modulator set to 47 psi (3.2bar).
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014 79 W116 300SD 'Stormcloud' RIP 04/11/2022
|
 |
| Bookmarks |
|
|
Linear Mode
