![]() |
No 3rd or 4th gear
My 85 300D California recently stopped shifting into 3rd.
under hard or soft acceleration it shifts from 1st to 2nd fine/perfect, then at what seems like the correct shift point for 3rd, it's like it goes to neutral, nothing there. If I coast it'll eventually shift back to 2nd. If I stop, it'll start over in 1st. Reverse working perfect. I changed the fluid and filter, no change. It was pretty dirty. There was a tiny amount of shrapnel in the pan. A couple slivers of aluminum, like stripped threads. And a chunk of green plastic, about 1/8" wide. I'll try to post a pic. I did the B2 on both my other cars, I don't think that's the problem here… It seems like a clogged/stuck valve body, to me. I'm hoping one of you trans gurus will tell me it's a simple external repair. I'm not up to pulling the trans here, or a rebuild. Any ideas or input greatly appreciated. Thanks, Bri |
1 Attachment(s)
|
There is a chart in the thread below. It shows that K1 is used in shift 3 and shift 4. Maybe that is your problem. Just a guess.
http://www.peachparts.com/shopforum/diesel-discussion/327394-722-4-transmission-now-shifts-first-fourth.html |
Most likely the K1 clutch pack...requires a teardown.
|
All times are GMT -4. The time now is 02:20 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website