Need HELP finding 300SDL vacuum control valve hose!
 

Hi all...
I need some help finding the 90 degree black hose on the vacuum control valve.
This is the part number for the complete valve 1403000833 and attached pic.
The 90 degree black hose disintegrated away and having trouble finding a replacement. It attaches the vacuum modulator plastic line. I just need the hose!
Its the same one used on all the 190D, SDLs, 300D-124s with auto trans.
Thank you!

This worked for me.

http://www.peachparts.com/shopforum/diesel-discussion/247286-60x-vcv-vent-hose-fitting-alternative.html

The good news is that fitting basically just vents to atmosphere. The hose that connects to it goes into the cabin for "fresh air". Pretty much anything that will fit in the hole and stay put will work.

Ohhh, looks good!

You sure about that?
I follow that line right from the vacuum control valve on the IP to the vacuum modulator on the side of the transmission.
At lease that is how its on my SDL.

The line from the side of the VCV is a vent line. It goes to the driver footwell and hangs open. One of the lines on top of the VCV goes to the transmission modulator. The other lines branches off the engine vacuum pump.

Sixto
98 E320s sedan and wagon
02 C320 wagon

Does your transmission shift like Helen Keller is at the wheel? That side fitting is the vent, it does NOT go to the modulator.

If the line goes to the modulator, then it is hooked up very very wrong.

LOL - I got the whole dang thing apart - your correct, does not go to the modulator. My bad.
I ordered that Dorman part - looks good!

I just like to say thanks to all that added to this thread. And yes that Dorman part works great!