Hi All,

Thanks to the input from many of you, i got the engine running, also thanks to 'shelter in place' by our county... COVID-19 special...

Background:
- Purchased a 1974 W115 240D that sat for 10-15 years
- Removed the engine and refreshed it with all new gaskets, o rings and crush washers
- Now, it starts first time (after using the glow plugs); the engine is still outside to facilitate easy IP adjustment

Checked:
- IP timing, at 24 Deg (Drips one drop per second)
- Injectors pop pressure (all of them around 1666 psi). Yes, i purchased injector pop tester.

Problem:
- I turn the glow plugs on for few seconds and fire it up. I starts first go... but, there is white smoke...

Any suggestions? the engine is still outside, so i can work on it easily.

Thanks in advance.

__________________
1974 MB W115 240D