|
|
|
|
|
#1
06-02-2020, 06:27 PM
|
|||
|
|||
|
99 W210 TD, finally got my first CEL
It's been on for a few weeks now. It'll come on for a few days, go off for a day or so, come back, etc. I broke out my trusty code reader and it gave me some weird P01 80/$80 but said fuel temp sensor a circuit.
From what I've seen on Google (mostly on other Benz models) it's either the sensor itself, or just a dirty connection. I looked for a fuel temp sensor on FCP Euro where I get all my Benz parts and it didn't have anything. What is the proper name for the sensor that I need? 
|
|
#2
06-03-2020, 12:43 PM
|
||||
|
||||
|
Fuel temperature sensor on OM606 is integrated in the fuel valve.
The valve is bolted to the side of the injection pump and has 3 hoses and 1 electrical connector. It can be replaced without removing the intake manifold if you pull out the washer tank and reach in that way. It would be a good idea to replace the valve as they can leak internally and wick diesel up the engine harness through the connector.
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech
|
|
#3
06-03-2020, 02:37 PM
|
|||
|
|||
|
Eww, that doesn't sound like fun
 Do you know a part # for it or another name so I can look the part up? FCP Euro strikes out again when typing in fuel valve.
|
 |
| Bookmarks |
|
|
Linear Mode
