|
|
|
|
|
#1
01-06-2021, 11:27 PM
|
|||
|
|||
|
Removing W126 headlight assemblies....
To anyone who's swapped out headlights, how do you get access to the bottom two bolt, in order to remove the assembly?
I looked from underneath, but I'd need like an 18" extension to reach..... Do you remove the small lateral panels underneath the headlights(where the wipers are mounted)? Just thought I'd ask before I started ripping into it..... Thanks in advance,
__________________
Cửa hành kính cận Sài G̣n cung cấp cho khách hàng đa dạng các loại mắt kính cận khác nhau như: kính chống ánh sáng xanh, mắt kính mỏng, mắt kính đổi màu,... Điện thoại: 02838350132 hoặc 0902815245 Cơ sở 1: Số 503 Điện Biên Phủ, phường 3, quận 3, TP.HCM 
|
|
#2
01-07-2021, 10:50 PM
|
|||
|
|||
|
Headlight bezel at least to 85 are held in by the white thumb wheels that are accessed with the hood up. Next there is a metal surround held in by 4 screws.
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do.
|
|
#3
01-08-2021, 07:41 AM
|
|||
|
|||
|
|
|
#5
01-09-2021, 08:57 AM
|
||||
|
||||
|
Just watched the youtube video on replacing the headlight; those MB engineers in the '70's and '80's were geniuses. The Chevy stealership in Atlanta just charged my son $150 to replace the front blinker bulb on his Tahoe. When I looked at it on line, it recommended removing the entire front bumper to replace that bulb.
The MB engineers would have been outraged.
|
 |
| Bookmarks |
|
|
Linear Mode
