|
|
|
|
|
#1
08-02-2021, 01:50 AM
|
|||
|
|||
|
190D Serpentine Belt replacement
Hi,
I have a 1986 190D and can not find anything on the internet that explains how to change the serpentine belt. I have found an explanation for the 190E but nothing for the diesel. I am waiting on a service manual but will be taking a trip soon and the belt looks like it is ready to go. It looks pretty tight with not much room to work in front of the radiator without removing it. I was also considering just loosening the alternator and trying to get the belt on that way. Does anyone have any ideas? Thanks! 
|
|
#2
08-02-2021, 08:59 PM
|
|||
|
|||
|
Check with the FSM.
https://www.startekinfo.com/service/download-document/outside/11832/#
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014 79 W116 300SD 'Stormcloud' RIP 04/11/2022
|
|
#4
08-06-2021, 08:10 AM
|
|||
|
|||
|
Alec300SD,
That is a great resource. I have a 1986 190D 2.5 automatic. I believe I have a 602.911 engine. I can't find anything in that manual or online that walks you through the replacement of the vacuum control shut-off valve. I have found info. on the 190E but not the 190D Do you know where I could find that? Thanks.
|
|
#5
08-06-2021, 10:23 AM
|
|||
|
|||
|
Job Number 07.1-220.
Page 317 on the pdf. https://www.startekinfo.com/service/download-document/outside/11832/Resources/201Create/PDF/70006.pdf
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014 79 W116 300SD 'Stormcloud' RIP 04/11/2022
|
 |
| Bookmarks |
|
|
Linear Mode
