|
|
|
|
|
#1
01-22-2022, 04:34 PM
|
|||
|
|||
|
OBD1 code reader recommendation
Any recommendations on a code reader for my 99 e300. I do have the a product from China that worked great for the first few years but today I'm locked out. Any Code readers you have tried that will give me access to info such as SRS would be a great help.im working on door and side curtain https://showbox.bio/ https://tutuapp.uno/ https://vidmate.cool/ airbags and would like to see the state of the sensors. Anybody try the 38 pin to OBD2 adapter? I have a generic OBD2 Bluetooth transmitter that I use with torque and it lets me clear check engine light. It shows no other codes even with two blown airbags. Thanks in advance.
Last edited by Hardus1; 01-23-2022 at 07:32 AM. 
|
|
#2
01-22-2022, 05:23 PM
|
|||
|
|||
|
When I had a 98 E300, the Xentry set up I have have was able to emulate HHT using the 38 pin connector. Seemed to work just fine. But that might be more than you'd want to spend to read codes.
__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 159k miles 06 E320 CDI "Rutherford", Black on Tan, 179k mi, Stage 1 tune, tuned TCU 91 300D "Otis", Smoke Silver on Tan, 145k mi, wastegate conversion, ALDA delete 19 Honda CR-V EX 77k mi Fourteen other MB's owned and sold 1961 Very Tolerant Wife
|
 |
| Bookmarks |
|
|
Linear Mode
