I'm looking for a blown up color wiring diagram applicable to the fintail 200D's, and possibly some advice if anyone has any additional tips for me,

I picked up a 200D recently, but about half the lights didn't work when I first got it. I did fix a few of them by cleaning corrosion on the fixtures/bench testing them one by one and replacing a couple switches. I still have some issues that I'm running out of ideas on how to fix.

What doesn't work: high beam flashing (high beam regular works + switch is NOS), parking lights on either side (used to work), rear headlights (only one of the mini bulbs lights up when headlights are on),

What doesn't seem to work properly but works: the headlights turn on one click to the light. From a diagram I found online, I believe first click is supposed to be all the lights but the headlights and the headlights are supposed to be the second click to the right, That switch was also replaced with a used working, thought the original switch tested funny on a multi meter (plus the column switch and emergency flasher switches were also bad).


Long story short, I'm looking for a color schematic so I can trace down, one by one, the remaining lights that don't work + make sure my headlight switch is wired correctly. Would appreciate a copy or happy to pay since information on these is so scarce, just itching to figure this out because its killing me rn.