PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   NYC Diesel inspection (http://www.peachparts.com/shopforum/diesel-discussion/56413-nyc-diesel-inspection.html)

JoeAugust 02-04-2003 12:31 PM

NYC Diesel inspection
 
I just got my first Mercedes --'82 300D.
So far, it is a joy.

Can anyone recommend a good mechanic/NYS inspection staion to me?

Also, the car lurches forward as it shifts from 1st to 2nd. Any advice about how to address that?

Thanks,

Joe

84300DT 02-04-2003 02:17 PM

hey welcome joe -
not being from ny i cannot help you on the inspection.

re 1-2 shift - this notorious hard shift is well covered here in a lot of threads. so do a search on trans, vacuum, modulator, hard shifts etc and you will find a wealth of info on the subject.
how many miles on your 300d?

JoeAugust 02-04-2003 02:22 PM

Just turned 150K. Other than the hard-shift. it seems to be running great.
thanks for the info.

Best,

Joe

84300DT 02-04-2003 02:27 PM

150k - only a baby!
you could also try searching 'bowden cable' - this controls when the trans shifts.

the best link to look at in the meantime is:

http://www.babcox.com/editorial/ic/ic20242.htm

this will give you complete overview of the trans.

good luck/bob

DieselHead 02-04-2003 04:01 PM

Joe,
Where are you located? I have a good mech. in Westchester.

Alex

bznupe30 02-04-2003 04:23 PM

If your in queens try the Little Garage.
They are a little pricey, but do an excellent job.
They are in woodside queens off the queens blvd
The mgr matthew meng, good guy very knowledgable
They do a lot of work on bmw's

6920 48th ave

718 446 3670

p.s. i have no interest in that garage
i've used them 3 or 4 times w/no problems

jude in flushing

McDiesel 02-04-2003 04:32 PM

vacuum line
 
sounds like a vaccum line has come undone or is leaking

on my 2.5 300 turbos there are two lines right above the radiator that can be jarred loose...

:confused:


All times are GMT -4. The time now is 07:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website