|
|
|
|
|
#1
06-29-2003, 05:08 PM
|
|||
|
|||
|
Help replacing air cells/ accumulators, fluid, filter...
I'll be replacing the accumulators/ air cells on my '81 300TD within the next week or so. When I do I'll also flush, replace the filter, and refill with new MB hdyraulic fluid.
I'm a pretty decent DIY'er, is there anybody that can provide some instructions/ directions beyond general tips found by searching the forum? 
|
|
#2
06-30-2003, 06:03 AM
|
|||
|
|||
|
Bleed the system at the valve near the differential, it has a bleeder. Use tubing wrenchs on the lines. The system is self bleeding. When your done put a couple of friends in the trunk, then start the car and run it at 1500 rpm`s or more, this will trigger the valve to raise the car.
John
|
|
#3
06-30-2003, 09:13 AM
|
|||
|
|||
|
What exactly are you referring to when you say...
tubing wrenches?
|
|
#4
06-30-2003, 11:00 AM
|
||||
|
||||
|
Flare nut wrenches. They wrap 5/6 of the way around the nut so they can't slip off.
__________________
Rick Miley 2014 Tesla Model S 2018 Tesla Model 3 2017 Nissan LEAF Former MB: 99 E300, 86 190E 2.3, 87 300E, 80 240D, 82 204D Euro Chain Elongation References
|
 |
| Bookmarks |
|
|
Linear Mode
