![]() |
Re: First, look at this diagram
Quote:
There should be another number on the end of it. That's the part I need. |
I will go home and email you by 7 PM
Sorry the diagram is at home. I will get back to you quickly!
|
Here is your answer.....
|
OOps wrong picture but my RAID computer is down
try back in one hour...
|
Here it is
|
Carrameow,
Million thanks again, that's what I needed, the P/N for the 4th synchro. I'll probably end up replacing all of them along with seals, gaskets, etc., just to get the tranny to 100%. |
This may be a future project for me, my syncros are not 100% but the trans is quiet. I think I could replace a couple syncros, shim the bearings and be good for another lifetime.
If you post back with other details like parts costs and any special tools or techniques needed, I would appreciate it. |
| All times are GMT -4. The time now is 06:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website