|
|
|
|
|
#1
11-06-2003, 06:18 PM
|
||||
|
||||
diesel purging an e300td -606 engine
Any help on how to diesel purge my 606 engine would be appreciated.
__________________
1998 E300Turbodiesel 1980 300d Ready- Ronnie Last edited by ready-ronnie; 11-06-2003 at 11:54 PM. 
|
|
#2
02-16-2004, 02:46 PM
|
||||
|
||||
|
Better Late Than Never...
Yes, it can be done, but it is a PITA compared to the old engines. On my 124 chassis with the 606, I took out the windshield washer reservoir, and located the two rubber fuel lines that attach to the metal lines near the firewall leading from (and to) the fuel tank. Pull off the lines and dunk them both into the Diesel Purge can, and bombs away. Don’t mix up the fuel lines up when you replace them!
__________________
Current rolling stock: 2001 E55 183,000+ Newest member of the fleet. 2002 E320 83,000 - The "cream-puff"! 1992 500E 217,000+ 1995 E300D 412,000+ 1998 E300D 155,000+ 2001 E320 227,000+ 2001 E320 Wagon, 177,000+ Prior MBZ’s: 1952 220 Cab A 1966 300SE 1971 280SE 1973 350SLC (euro) 1980 450SLC 1980 450SLC (#2) 1978 450SLC 5.0 1984 300D ~243,000 & fondly remembered 1993 500E - sorely missed.  1975 VW Scirocco w/ slightly de-tuned Super-Vee engine - Sold after 30+ years.
|
|
#3
02-16-2004, 04:32 PM
|
||||
|
||||
|
Thanks Runningtohot, I did the purge already by just filling the filter up twice with DP. The next time I will give your system a try.
__________________
1998 E300Turbodiesel 1980 300d Ready- Ronnie
|
 |
| Bookmarks |
|
|
Linear Mode
