|
|
|
#1
|
|||
|
|||
vacuum connector '82 TD
When I installed my glow-plugs last week, I noticed the vacuum tee was broken. I must have done it, because I haven't noticed it before. This looks like the first tee after the pump. It has a large black line going into and out of it. There are two smaller lines teed off, one changes to a brown line that goes thru the firewall. The other goes to the IP and the top of the valve cover. I looked on fastlane but didn't see the right part. What is the correct name of that part so I can order one. I haven't noticed any differance in the way the car runs or operates. Thanks.
__________________
'93 300D 200k (since Aug 04) '82 300TD 205k (since March 04) '02 Ford Escape 192k (bought new) '90 Ford Festiva 310k (since '92 with under 10k) '01 Jeep TJ Wrangler 278k (since 07 with 235k) '76 VW Westfalia van 150k ? (since '90 with 100k) '72 Chevrolet Corvette conv. (base not a LT1) 175k (since '84 with 100k) 71' VW Squareback (since '72 with under 9k, odo turned over, then stopped then replaced. maybe 250k) '87 Yamaha Riva 125 scooter 7k |
#2
|
||||
|
||||
go to any partsRus or NAPA
Hello tripacer
Go to any partsRus or NAPA. It is called a "vacuum T" at the auto parts store. The only thing that matters; is the hose size it connects to. Last week I bought some for $0.38 each, needed for work. Have a great day.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
Bookmarks |
|
|