|
|
|
#1
|
||||
|
||||
606 ip
I am in the process of up grading my 603 to a 606, I am using the 603 ip cause my car don't have any of the electronics ! can I remove the 606 plungers and switch them to the 603 ip ???? thanks J
|
#2
|
|||
|
|||
You can't, but an injection shop can.
|
#3
|
||||
|
||||
Will there be a dramatic differance Between the 6mm compared to the 5.5 ?
|
#4
|
|||
|
|||
Around 25-35hp.
|
#5
|
|||
|
|||
only in case there is a + in air flow to be able to burn the extra fuel.
Having that done in an injection shop at normal labour rates I fear it does not make sense (unless the 606 ip is damaged on the other end and the guy in the shop is a good friend). Try to get a set of 7 mm elements from Myna, have them installed and sell the 606 ip complete. Tom |
#6
|
|||
|
|||
Thats kind of obvious.
|
#7
|
||||
|
||||
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
Bookmarks |
|
|