I just installed a "performance" calibrated injection pump on one of my 300SD (I have a pair of 1983) and need some basic info before I get a run on the dyno, anyone have some specific info? I want a base run before intercooling, injectors (stock rebuilds right now), different turbo and intake etc.
Greg

123hp 180tq maxed at 3k

lots of dynos out there keep lookin

all falls off around 4k

__________________
1985 300D - 599,xxxk - blue interior #265 Monark Nozzle, AL129X, 15" Ronals, Gen II Big Brakes hunting
1985 300D - 491,xxxk - in prog-{A-A IC, 3" exhaust, psi\pyro, 28*BTDC, Hella Euros, IP Limiter removal
1985 300TD - 783,xxxk - parts car,used new engine with ALDA cap inplace
1987 Kenworth T-600 8LL 425 CAT Mech. - 6,000,000+k - DEI exhaust wrap, punched through resonators, 1 recent rebuild,

Not sure whose these are but here you go.

Attached Thumbnails

   

__________________
1974 450SL White/Navy Blue

1983 300SD White/Parchment, VDO Boost Guage, 215/60R15 Bridgestone Potenza RE960AS Pole Positions on 15X7 15 Hole Wheels, Straight Piped, 298K?

2004 Ford Excursion XLT 4X4, 5.4L V8, 285/65R16 BFG AT KO