Quote:
Originally Posted by Deni
Hi Tomnik,
I apologize I didn't write you anymore, as I've agrred with myself that if I don't sell the car until the end of the summer than it stays with me. The first expenditure will be 7 mm elements from you, if you still have them  . |
In October the 7.5 elements will be available. Wait for them!
Quote:
Originally Posted by Deni
I've set my turbo at about 15 psi now. How much power can I get from 15 psi worth of air? I know the answer is far more complicated as it depends on many factors, but roughly speaking.
|
Up to now I never did a dyno run. For me the # of hp is not important, it's more the feeling and top speed that I can "measure".
Just put your boost to 15 psi and check it. I am more interested in getting better drive ability (mileage, emission, better efficiency,...) than pushing to the limits for racing, so I limit boost to max. 1 bar and max. rpm to 5000/min but just for governor setting. I can not remember when I ever rev'd beyond 4500/min. Nice running engine without idle issues and smoke are my goals instead of just one super race then loosing the engine...
I have an IP of a 602 turbo waiting for the elements but it will be installed in a boat of my friend and I have only my 603a and 617a, otherwise I would send you a modified IP for testing.
Try to get a VTG. This will be a good up-grade for stock IP and later do the IP.
Tom
08-09-2009, 06:12 AM
Threaded Mode
