|
|
|
#1
|
||||
|
||||
OM606:what are the tranny options?
ok i have a lead on a cheap om606 and i want to drop it in a w123 what are the tranny options?
Of course less electronics the better
__________________
Wie lange wird Ihr Auto leben? |
#2
|
||||
|
||||
Anything that goes on a OM60x engine...
__________________
John Robbins '05 E320 CDI - 240k '87 300TD - 318k |
#3
|
||||
|
||||
Hmm.....
I thinkthe O/P was looking for a Trans that will put up with a Tuned Up OM.606 which could well develop up to say, 600 BHP.... A 'Standard' 605/6 trans may well fit and work, But not for long at Those powers!
__________________
http://i190.photobucket.com/albums/z...0TDnoplate.jpg Alastair AKA H.C.II South Wales, U.K. based member W123, 1985 300TD Wagon, 256K, -Most recent M.B. purchase, Cost-a-plenty, Gulps BioDiesel extravagantly, and I love it like an old dog. W114, 1975 280E Custard Yellow, -Great above decks needs chassis welding--Really will do it this year.... |
#4
|
|||
|
|||
If you try to get 600hp at that engine, you have over 800nm.
right size turbo 900nm. There is no bolt on transmission what can handle that. Glose ratio Getrag at 2.3/2.5 16v can handle over 700nm.
__________________
E21 550hp diesel http://jeemu.kuvat.fi/kuvat/BMW+E21+%28diesel%29/ w202 m104 1000hp with BIG turbo project |
#5
|
||||
|
||||
So, we're looking at a Mercedes-Benz 2.5 Cosworth 5 speed gearbox....?
__________________
http://i190.photobucket.com/albums/z...0TDnoplate.jpg Alastair AKA H.C.II South Wales, U.K. based member W123, 1985 300TD Wagon, 256K, -Most recent M.B. purchase, Cost-a-plenty, Gulps BioDiesel extravagantly, and I love it like an old dog. W114, 1975 280E Custard Yellow, -Great above decks needs chassis welding--Really will do it this year.... |
#6
|
|||
|
|||
That dyno graph what i post 7400rpm topic, that car is originally 2.3 16v but change om606. So there is also getrag
__________________
E21 550hp diesel http://jeemu.kuvat.fi/kuvat/BMW+E21+%28diesel%29/ w202 m104 1000hp with BIG turbo project |
#7
|
||||
|
||||
Quote:
So, the Getrag from W124 2.3 16V is pretty good?
__________________
http://i190.photobucket.com/albums/z...0TDnoplate.jpg Alastair AKA H.C.II South Wales, U.K. based member W123, 1985 300TD Wagon, 256K, -Most recent M.B. purchase, Cost-a-plenty, Gulps BioDiesel extravagantly, and I love it like an old dog. W114, 1975 280E Custard Yellow, -Great above decks needs chassis welding--Really will do it this year.... |
#8
|
|||
|
|||
getrag from w201 2.3 16v "cosworh"
__________________
E21 550hp diesel http://jeemu.kuvat.fi/kuvat/BMW+E21+%28diesel%29/ w202 m104 1000hp with BIG turbo project |
#9
|
||||
|
||||
A 722.3 auto tranny will work fine, no electronics required. A plain 722.3 will handle the output from a stock or maxed-out OM606 (175-225hp) without mods. If you want 400-600hp (which I doubt, as you didn't specify this in your original post) then you'd need the 722.3 rebuilt with SL600 internals, which should take the power; and it would be a bolt-in. BlueRidgeMB in Atlanta can build one for you with Kevlar clutches, etc but it wouldn't be cheap.
I'm not sure what manual trans would hold up behind 400-600hp but for ~200hp, there are lots of options. |
#10
|
||||
|
||||
the kid from black smoke racing is running a tremmic TKO 600. that will really limmit you electronics and require another pedal. good luck with the bell housing!
|
#11
|
|||
|
|||
I have 700nm and 717.433 box
__________________
E21 550hp diesel http://jeemu.kuvat.fi/kuvat/BMW+E21+%28diesel%29/ w202 m104 1000hp with BIG turbo project |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|