|
|
|
|
|
#1
07-01-2007, 08:17 PM
|
|||
|
|||
|
Mega Squirt Installation Guidelines/Write-up
The following links are to a three section write up covering a typical naturally aspired successful MS installation listing required components, a basic procedure, some 16V particular hints; screen prints of Mega Squirt settings that should get you running and ready to really tune, and photos of components and a typical installation.
This is not a step-by-step instruction. Doing a MS or other stand-alone EFI conversion is not difficult. Everything is easy if you have a few basic skills and an understanding of how an engine works and what EFI needs to know to interface with your engine to make it run well. Comments and suggestions are welcome..... bobf. http://www.snapdrive.net/files/465230/16V%20MEGA%20SQUIRT%20EFI%20INSTALLATION%20%28text%20only%29.doc http://www.snapdrive.net/files/465230/16v%20MEGA%20SQUIRT%20EFI%20INSTALLATION%20%28screen%20prints%29.doc http://www.snapdrive.net/files/465230/16V%20MEGA%20SQUIRT%20EFI%20INSTALLATION%20%28photos%29.doc Last edited by matsalleh76; 07-04-2007 at 04:11 AM. Reason: Revised Links: July 4, 2007 
|
| Bookmarks |
|
|
Threaded Mode
